The corrugated metal shower is a pompous addition to any modern and stylish bathroom. After a certain amount of time, it claims to be clean. However, corrugated metal showers are nice to look at and convenient to use, but they are not very easy to clean. To clean a corrugated metal shower, you need to learn the correct method step-by-step.
However, it needs to be cleaned regularly to get over years of service from your corrugated shower. Metals get rust when they come in contact with water. So, the lack of regular cleaning can gradually cause your shower to lose its appearance and energy.
If you are looking for a simple and effective way to clean your corrugated metal shower, you are at the right place. This article will show you the most effective method to clean your corrugated metal shower in a few steps.
6 Easy Steps To Clean Corrugated Metal Shower: Try Efficiently
Cleaning corrugated metal showers will not make you feel complicated if you have experience with a better method. Below is a step-by-step method of cleaning it.
Step-1: Gather Necessary Ingredients
To clean your corrugated metal shower, you first need to collect some equipment. The equipment is listed below:
- Dish soap;
- Hot water;
- A Bucket;
- Giant soft-bristle brush;
- Clean cloth;
- Metal polish.
Step-2: Make The Cleaning Mixture
Now, you need to make a mixture of hot water and dish soap. Do not mix with dish soap as much as you want in the hope of more cleaning. It may leave some soap residue even after cleaning your shower. Mix half a cup of dish soap with 2 gallons of hot water in a bucket.
Do not use more than this amount of water. It will reduce the amount of soap and never allow your shower to be finally clean. The step may need to be repeated.
Step-3: Use The Bristle Brush
When the mixture is ready, it is time to use the giant soft-bristle brush. Dip the brush into the mixture in the bucket. Dip one foot into warm paraffin, pausing between layers to allow them to dry. Now start using it with a tiny squeeze. Gently rub the metal surface of the shower in a circular motion.
Apply the mixture all over the shower in this way. Once it is finished, apply it to the whole shower a second time. Continue working until you are sure that the mixture has been applied evenly throughout the shower.
Step-4: Wait For Few Minutes
After applying the mixture to your metal shower, you will have to wait a while for it to settle. You can get some of your usual work done within this time because you have to wait at least 20 minutes for the mixture to work well.
At this time, it is recommended to remove the usual stains from the shower. But, if the dirt is hard to clean, you may need to give it more time. In the case of general dust, 20 minutes is enough.
Step-5: Wipe The Shower
In addition to the hot water you used for the soap and water mixture, you need to put some more hot water in a separate bucket. Dip a clean cloth into warm water for a while. Now lift it and lightly wipe the metal surface of the shower.
The purpose is to remove the soap mixture, including the dirt. After wiping half the surface of the shower, re-dip the cloth in water and wash it thoroughly as it has got some specks of dirt on it. This way, keep wiping the entire shower surface until the soap residue is cleaned thoroughly.
Step-6: Now Ready Your Shower To Use
Keep in mind that leaving soap residue on the surface of the shower can damage your precious resource. After wiping it well with a damp cloth, use a dry cloth to remove the dampness.
Metal shower surfaces can be easily rusted, so it is essential to get rid of wetness. Make sure it is dry thoroughly. The corrugated metal shower is now ready for reuse if the cleanliness satisfies you.
5 Mistakes Can Happen While Cleaning The Corrugated Metal Shower:
The surprising thing is that even after applying the correct method of cleaning the corrugated shower, your approach does not work due to some mistakes. Find out below what’s wrong may occur:
- Cleaning Very Frequently
It is recommended to clean the corrugated metal shower with just a towel every day after each bath. Therefore, you should not clean it frequently with soap and hot water. There is an indefinite deadline for heavy cleaning.
So, you have to clean the shower now and then. Cleaning once a month is enough. Frequent use of soap and hot water can stain the surface of the shower. Moreover, the soap residue may remain.
- Using Excess Dish Soap
The dish contains a ratio of soap and hot water. You should not use too much water or dish soap. If you use more dish soap than the required amount, it may be hard to wash. You may need to use much cleaner water to remove the soap out and out.
In addition, the soap can get stuck in the groove of the corrugated shower. It can gradually damage the place and create deep stains. Perform the procedure effectively using the right amount of soap.
- Not Drying Properly After Cleaning
Many people think that since the shower is used for bathing, it will not be a problem if it is always left wet. This is a misconception. Although water always flows through the shower, you should always let it dry. This will reduce the chances of getting infected with rust.
After cleaning the shower, keep it dry until you use it for bathing again. It is wise to remove the surface water after each bath and save it. Careful people are aware of this.
- Using Vinegar In A Little Dirt
There is no need to use vinegar if your shower is not affected by rust and complex stains. Many people use vinegar in any cleansing with the hope of more cleansing. It is unreasonable. Moreover, vinegar should not be used frequently in metal showers. It can cause it to fade slowly.
Dish soap and hot water are better solutions for regular nailers. Therefore, if you do not clean the shower for two months or more, there is a risk of rust with dirt. In this case, vinegar may be the most effective solution.
- Leaving The Shower Walls Wet
It is common for the bathroom shower walls to be wet. Therefore, you should try to keep the dough as dry as possible, especially when it is not being used. Since soapy water is used when cleaning the shower, it can stick to the wall. You probably don’t look at the walls after cleaning the shower.
If your wall is painted, soapy water will settle on it and create stains. Moreover, there is another kind of risk in the case of tail walls. As the soapy water will last longer, the tile may weaken and lose its effectiveness quickly.
5 Practically Proven Tips For Clean Your Corrugated Metal Shower:
In addition to knowing how to clean a corrugated shower, some beneficial tips can be even more helpful to you. Moreover, it makes your ultimate shower cleaning method somewhat hassle-free. The notable tips are mentioned below:
Tip-1: Do not use any metal brush except a plastic brush in a corrugated metal shower, no matter how dirty the dirt is. Otherwise, your metal shower may get a long-lasting stain.
Tip-2: Keep the shower clean regularly and wipe it off after each bath with a wash towel to avoid possible rust. It will not hold water.
Tip-3: The mentioned method is quite effective for cleaning the general dirt of the shower. So, if your shower gets a lot of rust, you must use vinegar because it works well in removing rust.
Tip-4: Make sure the corrugated metal shower is completely dry after cleaning. Water may be stuck in its grooves. Therefore, do not store it in wet conditions.
Tip-5: Turn off the flow of water before starting the shower cleaning process. Otherwise, water leaks out during the process and can disrupt your work.
Related Questions About Cleaning Corrugated Metal Shower:
Why Would You Clean A Corrugated Metal Shower?
You probably don’t want your corrugated metal shower to be faulty in less time. As the shower is made of metallic material, your carelessness brings rust to it. Proper maintenance and cleaning on time not only removes dirt but also makes it rusty easily which prolongs its lifespan.
Additionally, knowing the cleaning method and the vital tips, you also become aware of keeping it dry. In addition to cleaning the shower, it is significant to make sure that it stays dry during unused hours. This will keep it away from both dirt and rust.
How Often Should You Clean Your Corrugated Metal Shower?
Cleaning is usually recommended at least once a month for corrugated metal showers. But it also depends on your shower usage. In the case of corrugated steel showers, weekly cleaning is recommended. It helps to keep them primitive and shiny. In the case of other metals, cleaning is allowed 1/2 times a month.
But, you should have a routine to clean it every month. Metal showers attract a lot of dirt if they are not cleaned for a long time. Moreover, it quickly rusts and does not allow the shower to last for many years. Although there are ways to get rid of rust, it is still best to prevent rust.
Can You Get Out Rust From Corrugated Metal Shower Just By Cleaning?
There are two different ways to clean a corrugated metal shower and remove rust. Therefore, it is impossible to remove rust by cleaning the corrugated shower. Moreover, regular cleaning can prevent rust. When it gets a lot of rust you have to go a different way where there is also some difference between the tools used.
You will need tools like vinegar, sandpaper, zinc spray, broom, protective gloves, face mask to remove rust from metal showers. The rust removal method is a bit more complicated than the cleaning method but is perfect for rust prevention.
What Product Should You Use To Clean A Corrugated Metal Shower?
It is a piece of pleasant information that you do not have to buy any equipment from the shop separately for cleaning corrugated metal showers. Here are some of the most significant things you can do in your home every day. Cleaning the shower requires a few things that you can get your hands on.
If it is a matter of rust removal, you will need some extra materials that you may have to buy. So, why not clean the corrugated shower on time when you don’t need to purchase expensive equipment or products? Moreover, it is costly to remove rust because you need to buy the most equipment.
How To Stop Water-Flow In A Corrugated Metal Shower When Cleaning?
If you use a water-saving model of the shower, it will be easier to stop the water flow. Your first task in cleaning a corrugated metal shower is to stop the water flow, otherwise, water can restrict the job. You can get a water flow restrictor when purchasing a modern corrugated shower.
In addition, you can buy a water flow restrictor separately in the store. This can be turned off even if the water control is installed at the head of the shower. You will need water while doing the work, but it is hot water, and you have to store it in a separate bucket.
Can Vinegar Clean A Corrugated Metal Shower Perfectly?
Vinegar works well for cleaning corrugated metal showers. Moreover, it is a cheap cleaner that stays in every home. You don’t always have to use vinegar to clean the metal shower. It has a specific use, especially for rust.
If you clean your metal shower at least twice a month or every month, then the chances of rust are much lower. However, if the water stays in it for a long time and you clean it after a long time, it will rust. Then you must use vinegar to remove it because vinegar works well to remove rust.
Final Verdict:
A corrugated metal shower lasts about 15 to 20 years if you use it properly. But it depends on proper care and maintenance. So it is crucial to have a clear idea of the rules and time intervals for cleaning. You already know how to clean a corrugated metal shower.
No matter how expensive metal you use in your shower, it is troublesome to keep it rust-free if it is not cleaned. Hopefully, by following the mentioned cleaning method, you will be able to give longevity to your corrugated shower.
